| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | Provided |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DOG-209FA Industrial Dissolved Oxygen Electrode
Features
DOG-209FA type oxygen electrode improved from the previously dissolved oxygen electrode, change
diaphragm into a grit mesh metal membrane, with high stability and stress resistant, can be used in
a more harsh environment, maintenance volume is smaller, suitable for urban sewage treatment,
industrial wastewater treatment, aquaculture and environmental monitoring and other fields of
continuous measurement of dissolved oxygen.
Technical Indexes
|
Ultra resistant to pressure (0.6Mpa) wallop, imported (grit mesh metal membrane) |
|
|
Up thread: M32 * 2.0 |
Measuring range: 0-20mg / L |
|
Measuring principle: Current type sensor (polarographic electrode) |
|
|
Breathable membrane thickness: 100μm |
|
|
Electrode shell material: PVC or 316L stainless steel |
|
|
Temperature compensation resistance: Pt100, Pt1000, 22K, 2.252K, etc. |
|
|
Sensor life:> 2 years |
Cable length: 5m |
|
Detection limit: 0.01 mg / L (20 ºC) |
Measurement limit: 40 mg / L |
|
Response time: 2min (90%, 20 ºC) |
Polarization time: 60min |
|
Minimum flow rate: 2.5cm / s |
Drift: <2% / month |
|
Measurement error: <± 0.01 mg / L |
|
|
Output Current: 50-80nA/0.1 mg / L Note: Maximum current 3.5uA |
|
|
Polarization voltage: 0.7V |
Zero oxygen: <0.01 mg / L |
|
Calibration interval:> 60 days |
Measured water temperature :0-60 ºC |
){kind=link}