Industrial Composite Sewage pH Sensor

• Measuring Range: 0-14pH
• Temperature Range: 0-60ºC
• Internal Impedance: 150-250 MΩ (25ºC)
• Installation Size: Upper and Lower 3/4NPT Pipe Thr
• Connection: Low-Noise Cable Goes out Directly
• Zero Point Potential: E0=7pH±0.3
• Model NO.: PH8010
• Compressive Strength: 0.6MPa
• Slope: ≥96%
• Internal Impedance: 150-250 M&Omega: 150-250 MΩ (25ºC)
• Model No: pH8012
• Transport Package: TNT
• Specification: Upper and Lower 3/4NPT Pipe Thread
• Trademark: BOQU
• Origin: Shnaghai China(Mainland)
• HS Code: 9027809900
• Production Capacity: 80000pieces/Year

Product Description

 

Model No.: PH8012

Measuring range: 0-14pH

Temperature range:0-60ºC

Compressive strength:0.6MPa

Slope: ≥96%

Zero point potential: E₀=7PH±0.3

Internal impedance: 150-250 MΩ (25ºC)

Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding)

Installation size: Upper and Lower 3/4NPT Pipe Thread

Connection: Low-noise cable goes out directly.

Application: Applicable to various industrial sewages, environmental protection and water treatment.  

Features of PH Electrode

It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, non-block and easy

maintenance.

 Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment

 It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is

no need of the jacket, thus saving the installation cost.

 The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 20

meters free of interference.

 There is no need for additional dielectric and there is a little amount of maintenance.

 High measurement accuracy, fast responsing and good repeatability.

 Reference electrode with silver ions Ag/AgCL

 Proper operation shall make service life longer.

 It can be installed in the reaction tank or pipe laterally or vertically.

 The electrode can be replaced by a similar electrode made by any other country.

Basic Principle of pH Electrode
In PH measurement, the used electrode is also known as the primary battery. The primary battery is a system, whose role is to transfer chemical
energy into electrical energy. The voltage of the battery is called the electromotive force (EMF). This electromotive force (EMF) is composed of two
half-batteries. One half-battery is called the measuring electrode, and its potential is related to the specific ion activity; the other half-battery is the
reference battery, often called the reference electrode, which is generally interlinked with the measurement solution, and connected to the measuring
instrument.
 

Model No.: PH8010

Measuring range: 0-14pH

Temperature range: 0-60ºC

Compressive strength:0.6MPa

Material: PPS/PC

Slope: ≥96%

Zero point potential: E₀=7PH±0.3

Installation size: Upper and Lower 3/4NPT Pipe Thread

Connection: Low-noise cable goes out directly.

Application: Applicable to various industrial sewages, environmental protection and water treatment.  

 

It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, non-block and easy

maintenance.

 Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment

 It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is

no need of the jacket, thus saving the installation cost.

 The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 20

meters free of interference.

 There is no need for additional dielectric and there is a little amount of maintenance.

 High measurement accuracy, fast responsing and good repeatability.

 Reference electrode with silver ions Ag/AgCL

 Proper operation shall make service life longer.

 It can be installed in the reaction tank or pipe laterally or vertically.

 The electrode can be replaced by a similar electrode made by any other country.