| Customization: | Available |
|---|---|
| Transport Package: | CTN |
| Trademark: | BOQU |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PH8012 Industrial Composite Sewage PH Probe
Basic Principle of pH Electrode
In PH measurement, the used electrode is also known as the primary battery. The primary battery is a system, whose
role is to transfer chemical energy into electrical energy. The voltage of the battery is called the electromotive force
(EMF). This electromotive force (EMF) is composed of two halfbatteries. One halfbattery is called the measuring
electrode, and its potential is related to the specific ion activity; the other halfbattery is the reference battery, often
called the reference electrode, which is generally interlinked with the measurement solution, and connected to the
measuring instrument.
|
Model No.: PH8012 |
|
Measuring range: 0-14pH |
|
Temperature range:0-85ºC |
|
Compressive strength:0.6MPa |
|
Slope: ≥96% |
|
Zero point potential: E0=7PH±0.3 |
|
Internal impedance: 150-250 MΩ (25ºC) |
|
Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding) |
|
Installation size: Upper and Lower 3/4NPT Pipe Thread |
|
Connection: Low-noise cable goes out directly. |
|
Application: Applicable to various industrial sewages, environmental protection and water treatment. |
Features of PH Electrode
|
1.It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, non-block and easy |
|
maintenance. |
|
2.Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment |
|
3.It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is |
|
no need of the jacket, thus saving the installation cost. |
|
3.The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 20 |
|
meters free of interference. |
|
4.There is no need for additional dielectric and there is a little amount of maintenance. |
|
5.High measurement accuracy, fast responsing and good repeatability. |
|
6.Reference electrode with silver ions Ag/AgCL |
|
7.Proper operation shall make service life longer. |
|
8.It can be installed in the reaction tank or pipe laterally or vertically. |
|
9.The electrode can be replaced by a similar electrode made by any other country. |
){kind=link}