Industrial Desulfurization pH Sensor High Temperature

• After-sales Service: Provided
• Warranty: Provided
• Measuring Range: 0~14pH
• Temperature Range: 0~95ºC
• Withstand Voltage: 0.6 MPa
• Material: PPS
• Model NO.: CPH-809
• Slope: <96%
• Zero Potential: 7pH ±0.3
• Installation Dimension: The Upper and Lower 3/4np
• Standard Length: 5m
• Can Be Equipped with Thermistor: 2.252K, PT100
• Connection Mode: Low Noise Cable Leads Directly
• Transport Package: Carton Box
• Specification: PPS
• Trademark: BOQU
• Origin: China(Mainland)
• HS Code: 9027809900
• Production Capacity: 500 PCS/Week

Product Description

Features

CPH-809 Industrial Desulfurization PH Sensor

Desulfurization of pH measurement of pH electrode is used for flue gas desulfurization, the electrode adopts the gel electrode, free maintenance, electrode under high temperature or high pH can still maintain high precision.

The basic principle of PH electrode
  For measurement of the PH electrode is also known as Primary battery. Primary battery is a system; its role is to make the chemical energy into electricity. The battery voltage is called the electromotive force (EMF). The electromotive force (EMF) consists of two half cell. One and a half cell called measuring battery, its potential is associated with specific ion activity; another one and a half in reference battery, often referred to as the reference electrode, it is general and measuring solution are interlinked, and connected to the measuring instrument.
  PH electrode made by plane glass ball bubble, high pollution resistance and resistant to impact.

Technical indexes

1. Measuring range :0~14 PH
2. Temperature range :0~95ºC
3. Withstand voltage :0.6 Mpa
4. Material :PPS
5. Slope :<96%
6. Zero potential :7PH ±0.3
7. Installation dimension : The upper and lower 3/4NPT pipe thread
8. Standard length :5m
9. Can be equipped with thermistor :2.252K,PT100
10. Connection mode : Low noise cable leads directly
11. Application : Used in all kinds of industrial wastewater treatment, environmental protection water treatment and pH measurement of flue gas desulfurization

 

Model No.: PH8011
Measuring range: 0~14PH	Temperature range: 0-60ºC
Compressive strength: 0.6MPa	Material: PPS/PC
Installation Size: Upper and Lower 3/4NPT Pipe Thread
Connection: Low-noise cable goes out directly.
The antimony is relatively sturdy and corrosion-resistant, which meets the requirements for solid electrodes,
corrosion resistance and the measurement of the water body containing hydrofluoric acid, such as the
wastewater treatment in semiconductors and iron and steel industries. The antimony-sensitive film is used for
the industries corrosive to the glass. But there are also limitations. If the measured ingredients are replaced by
antimony or react with antimony to produce complex ions, they should not be used.
Note: Keep the antimony electrode surface cleaning; if necessary, use the fine
Sandpaper to polish the surface of antimony.