Industrial Online Zirconia Oxygen Analyzer (BQG-2118)

• Customization: Available
• Type: Thermal Conductivity Gas Analyzer
• Measuring Range: 0~20.6%
• Model NO.: BQG-2118
• Current Output: 0-10madc or 4-20madc
• Heating-up Time: Approx 20 Minutes
• Transport Package: Carton Box
• Specification: SGS, CE, ISO9001
• Trademark: BOQU
• Origin: Shanghai
• HS Code: 9027809900
• Production Capacity: 1000piece/Month

Product Description

BQG-2118 zirconia oxygen analyzer is practical and reliable on-line automatic oxygen analyzer. Its measurement and display system consists of an oxygen detector (sensor) and a display instrument (transmitter). The detector is made of heat-resisting and anti-corrosion materials and can be directly inserted into flues for measurement of oxygen. The display instrument adopts single-chip control and can be used in combination with various electric unit combination instrument, general display recorder instruments and distributed control systems (DCS).
Zirconia oxygen analyzer is used for rapid and accurate on-line measurement and analysis of the oxygen contents in the flue gas produced by combustion equipments, such as boilers, furnaces and heaters, so as to realize control of low-oxygen combustion, energy saving and pollution abatement.

Features
1.The sensor is made of heat-resisting and anti-corrosion materials with high reliability.
2.With a special structural design, this analyzer doesn't need external air pump, and the reference air can realize convection by itself.
3.The sensor has a standard air interface, which enables calibration check on the site and provides convenient maintenance.
4.It adopts single-chip control and data processing with quick response, accurate measurement and stable performance.
   
Technical indexes
1.Measuring range: 0~20.6%
2.Accuracy: ≤±2%FS
3.Temperature of flue gas measured: ≤600ºC(low temperature type)
                                                     600~800ºC(high temperature type)
4. Excess air coefficient of flue gas measured: 0.1-99
5. Response time: ≤3 seconds (90% response)
6. Current output: 0-10mADC or 4-20mADC
7. Power supply: 220V±10% 50HZ± 5%
8.Working conditions: ambient temperature: 0~50ºC
                                      relative humidity:<85%
9.Heating-up time of the heater of zirconia detector: Approx 20 minutes
10.Overall dimension and dimension of the hole

Type	Overall dimension mm	Dimension of the hole mm (height * width)
Horizontal (H)	160x80x120	152 + 1 ×76 + 1
Vertical (Z)	80x160x120	76 + 1 ×152 + 1
Square (Q)	160x160x200	152 + 1 ×152 + 1
Wall mounting (G)	220 x 170 x 75 (height x width x thickness)