PH8000 PH8011 PH8083 Industrial Composite PHORP Electrode
Features
1.It adopts the worldclass solid dielectric and a large area of PTFE liquid for junction, difficult to block andeasy to maintain.
2.Longdistance reference diffusion channel greatly extends the service life of electrodes in the harshenvironment.
3.There is no need for additional dielectric and there is a little amount ofmaintenance.
4. High accuracy, fast response and good repeatability
------------------------------------------------------------------------------------------
Model No.: PH8000
Measuring range: 0~14PH Applicable temperature: 0~80ºC
Accuracy: ≤ 0.02PH Response time: ≤ l0sec
Slope: ≥96% Zero point potential: E0=7PH±0.3
Internal resistance: ≤ 50MΩ (25ºC)
Drift: ≤ 0.03PH/24h no accumulation
Installation: Rotary locking type and tail 3/4 thread (Rotate the electrode for 1/4
circle to insert it into or take it out of the process.)
It is widely used for measurement of all kinds of pure water and high-purity water in such places as thermal power plants (with the flow cell).
-----------------------------------------------------------------------------------
Model No.: PH8011
Measuring range: 0~14PH Temperature range: 0-85ºC
Compressive strength: 0.6MPa Material: PPS/PC
Installation Size: Upper and Lower 3/4NPT Pipe Thread
Connection: Low-noise cable goes out directly.
The antimony is relatively sturdy and corrosion-resistant, which meets the
requirements for solid electrodes, corrosion resistance and the measurement of the
water body containing hydrofluoric acid, such as the wastewater treatment in
semiconductors and iron and steel industries.
The antimony-sensitive film is used for the industries corrosive to the glass.
But there are also limitations. If the measured ingredients are replaced by antimony or react with antimony to produce complex
ions, they should not be used.
Note: Keep the antimony electrode surface cleaning; if necessary, use the fine
Sandpaper to polish the surface of antimony.
------------------------------------------------------------------------------------------
Model No.: PH8083
Measuring range: 0-2000mV Temperature range: 0-85ºC
Compressive strength: 0.6MPa Material: PPS/PC
Installation Size: Upper and Lower 3/4NPT Pipe
Thread Connection: Low-noise cable goes out directly.
It is used for the oxidation reduction potential detection in medicine, chlor-alkali
chemical, dyes, pulp & paper-making, intermediates, chemical fertilizer, starch,
environment protection and electroplating industries.
-----------------------------------------------------------------------------------------
Audited Supplier 
){kind=link}
){kind=link}