DDS-1706 Laboratory Conductivity Meter
DDS-1706 is an improved conductivity meter; based on DDS-307 on the market, it is added with the automatic temperature compensation function, with high price-performance ratio. It can be widely used for continuous monitoring of conductivity values of the solutions in thermal power plants, chemical fertilizer, metallurgy, environmental protection, pharmaceutical industry, biochemical industry, foodstuff and running water.
Technical Indexes
| Measuring range |
Conductivity |
0.00 μS/cm…199.9 mS/cm |
| TDS |
0.1 mg/L … 199.9 g/L |
| Salinity |
0.0 ppt…80.0 ppt |
| Resistivity |
0 Ω.cm … 100MΩ.cm |
| Temperature(ATC/MTC) |
-5…105ºC |
| Resolution |
Conductivity |
Automatic |
| TDS |
Automatic |
| Salinity |
0.1ppt |
| Resistivity |
Automatic |
| Temperature |
0.1ºC |
| Electronic unit error |
EC/TDS/Sal/Res |
±0.5 % FS |
| Temperature |
±0.3ºC |
| Calibration |
One point |
| 9 preset standard solution (Europe, USA,China, Japan) |
| Power supply |
DC5V-1W |
| Size/weight |
220×210×70mm/0.5kg |
| Monitor |
LCD display |
| Electrode input interface |
Mini Din |
| Data storage |
Calibration data |
| 99 measurements data |
| Print function |
Measurement results |
| Calibration results |
| Data storage |
| Use environmental conditions |
Temperature |
5...40ºC |
| Relative humidity |
5%...80%(Not condensate) |
| Installation category |
|
| Pollution level |
2 |
| Altitude |
<=2000 meters |
Audited Supplier 
){kind=link}
){kind=link}